-
东莞创亿嘉润滑油有限公司
电话:0769-81283290
联系人:刘超
手机:13725804996
企业QQ:1352876343
邮箱:1352876343@qq.com
网址:www.cyj188.com
地址:广东省东莞市南城区高新产业园区宏一路
邮编:523073
|
美孚润滑油系列 > 轴承循环油 > 美孚威格力100系列(Mobil Vacuoline 100 Series) |
美孚威格力100系列(Mobil Vacuoline 100 Series) 详细说明 (浏览2189次) |
|
|
|
|
Product Description
The Mobil Vacuoline 100 range is a series of extra high quality circulating system oils primarily intended for the lubrication of plain bearings in systems designed for full fluid lubrication, particularly those subjected to heavy water contamination, such as may be used for back-up roll bearings in metal rolling mills. Specifically, they meet the requirements for Morgoil rolling mill bearings including the Morgan "super demulsibility" advanced lubricant specification. The Mobil Vacuoline 100 Series oils are formulated from high quality base stocks and additives to provide outstanding water separation ability, good resistance to thermal degradation and oxidation, and protection against rust and corrosion.
The Mobil Vacuoline 100 Series oils are resistant to the formation of emulsion and sludge. Consequently the oils can contribute to cleaner systems and filters. Also solid contaminants separate readily for easy cleaning by centrifuge, filtration or settling. The Mobil Vacuoline 100 Series possess a high viscosity index and good demulsibility that is retained under conditions of severe water contamination and are recommended for both single and dual tank circulation systems.
Mobil Vacuoline 100 Series oils are the choice of rolling mill operators worldwide. They enjoy strong support of key equipment builders including Morgan Construction Company, Worcester, MA, USA.
Features and Benefits
The Mobil Vacuoline family of products is well known and highly regarded worldwide based on their outstanding performance and the global technical support which stand behind the brand. The exceptional performance of Mobil Vacuoline 100 Series oils, has made it the choice of rolling mill users around the world. Experience gained in close contact with key rolling mill builders, including Morgan Construction in the United States has been applied to ensure that Vacuoline oils meet the needs of evolving rolling mill designs and applications.
For Mobil Vacuoline 100 Series oils, this work has resulted in a formulation based on a high quality base stocks, along with specially chosen additives, to provide rust and corrosion protection and excellent demulsibility which results in superb equipment protection, highly reliable operation and long oil charge life. A review of the features, advantages and potential benefits of the product are shown below:
Features |
Advantages and Potential Benefits |
Outstanding demulsibility |
Ready separation from water and contaminants throughout the life of the oil for trouble-free operation and reduced downtime |
Good resistance to oxidative degradation |
Extended oil charge life and reduced oil replacement costs Cleaner system and filters and reduced maintenance costs |
Excellent rust and corrosion protection |
Enhanced equipment protection and equipment life | Applications
Mobil Vacuoline 100 Series oils are primarily recommended and used almost exclusively for rolling mill applications. The oils are suitable for:
- Back-up roll bearings of rolling mills, particularly Morgoil bearing systems, where either a single or dual tank is employed
- Other full fluid bearing systems and similar type applications in other industries, particularly where the bearings are subjected to heavy water contamination
Back to Top
Specifications and Approvals
Mobil Vacuoline 100 Series meets or exceeds the following industry and builder specifications: |
128 |
133 |
137 |
146 |
148 |
MORGOIL ® Lubricant Specification (Super Demulsibility Specification), MORGOIL® Advanced Lubricant New Oil, Revision 2.3, 26 March, 2004 |
X |
X |
X |
X |
X |
MORGOIL ® Lubricant Specification, New Oil, Revision 1.1, 27 January, 2005 |
X |
X |
X |
X |
X |
Typical Properties
Mobil Vacuoline 100 Series |
128
|
133 |
137 |
146 |
148 |
ISO Viscosity Grade |
150 |
220 |
320 |
460 |
680 |
Viscosity, ASTM D 445 |
|
|
|
|
|
cSt @ 40ºC |
150 |
220 |
320 |
460 |
680 |
cSt @ 100ºC |
14.8 |
18.8 |
23.9 |
30.1 |
36.7 |
Viscosity Index, ASTM D 2270 |
96 |
95 |
95 |
95 |
91 |
Pour Point, ºC, ASTM D 97 |
-9 |
-6 |
-9 |
-6 |
-6 |
Flash Point, ºC, ASTM D 92 |
280 |
288 |
286 |
296 |
318 |
Specific Gravity @15ºC kg/l, ASTM D 4052 |
0.89 |
0.89 |
0.90 |
0.90 |
0.91 |
Demulsibility for non-EP oils, ASTM D2711, ml water |
40 |
36 |
39 |
41 |
40 |
Demulsibility at 82ºC, ASTM D 1401 Minutes to 3ml Emulsion |
15 |
20 |
25 |
30 |
35 |
Rust Protection, ASTM D665 Distilled Water |
Pass |
Pass |
Pass |
Pass |
Pass |
Copper Corrosion, ASTM D130 3 hours @ 100ºC |
1B |
1B |
1B |
1B |
1B |
Foam Test, ASTM D 892, Seq I Tendency / Stability, ml/ml |
0/0 |
0/0 |
0/0 |
0/0 |
0/0 | |
| |
|
|