-
东莞创亿嘉润滑油有限公司
电话：0769-81283290
联系人：刘超
手机：13725804996
企业QQ：1352876343
邮箱：1352876343@qq.com
网址：www.cyj188.com
地址：广东省东莞市南城区高新产业园区宏一路
邮编：523073
|
| 福斯润滑油系列 > 液压油 > 福斯RENOLIN B10/B15/B32/B46抗磨液压油 |
| 福斯RENOLIN B10/B15/B32/B46抗磨液压油 详细说明 （浏览2006次） |
如今人们对高性能的机械设备的需求与日俱增，对机器日益增长的功能及工作效率的要求，导致机器的速度更快，受力更广，应用范围更广，也导致了对润滑油的要求不断增加。
福斯的工业用油顺应了当代工业发展的潮流。这些油品具有的优良品质，远远超过机械厂家的规格与指标。换油周期的延长及维修费用的降低，都能助您降低成本。
福斯工业用油有相当广的应用范围和极高的使用寿命，该特点提供了最优的润滑性及最低的损耗，甚至在高负荷情况下亦是如此。
|
产品名称 |
ISO粘度
等级 |
粘度
指数 |
开口闪点
℃ |
倾点
℃ |
主要应用 |
|
RENOLIN B 10
RENOLIN B 15
RENOLIN B 20 |
32
46
68 |
100
100
100 |
190
210
220 |
-27
-27
-24 |
通用型抗磨液压油，用于对油品氧化、老化、抗磨及抗乳化性能有要求的场合，满足并超过DIN HLP及ISO HM 等级。 |
|
RENOLIN B 32 HVI
RENOLIN B 46 HVI |
32
46 |
170
170 |
175
180 |
-36
-33 |
低凝抗磨液压油，用于所有液压系统，特别是要求高粘度指数的场合。如寒冷地区或低温环境机器设备的液压系统，露天作业的机器设备及工作温度极大的液压装置。满足并超过DIN HVLP及ISO HV 等级。 |
|
RENOLIN MR 0
RENOLIN MR 1
RENOLIN MR 3
RENOLIN MR 5
RENOLIN MR 10
RENOLIN MR 15
RENOLIN MR 20
RENOLIN MR 30 |
2
5
10
22
32
46
68
100 |
--
--
105
100
100
100
100
95 |
75
85
160
165
200
220
225
230 |
-42
-33
-30
-30
-30
-30
-27
-21 |
多用途润滑油，具有良好的抗氧化性及粘温性能，同时还有突出的防锈、清洁、抗磨性能。Renolin MR 0,MR 1,MR 3 是机床及纺织机器主轴/锭子用油。Renolin MR 5/10/20 属于极压性液压油，可在100℃的高温下持续使用，并提供优异的防锈保护。Renolin MR 30 用于较大的齿轮箱中，亦可作为初装及防锈油。
Renolin MR 系列产品满足并超过DIN HLPD/CLP及ISO HMD/CKC等级。 |
|
HYDROTHERM 46 NP 3 |
46 |
170 |
-- |
45 |
乙二醇基的抗燃液压油，用于接近高温、火焰及有防火要求的液压循环系统，主要用于冶炼、矿山、注塑成型等行业的液压设备。满足并超过DIN/ISO HFC 等级。 |
RENOLIN B
|
|
 |
High Quality HM Hydraulic Oils and CKC Lubricating Oils
|
|
High Quality HM Hydraulic Oils and CKC Lubricating Oils
The function and operational reliability of hydraulic systems depends largely on the quality of the hydraulic fluids used which, apart from transfering forces, must also seal, cool and lubricate. Because hydraulic oils are subject to a variety of stresses, they must fulfil a number of requirements. These must be maintained throughout the service life of the oil and must help combat the formation of undesirable reaction by-products. The RENOLIN B series of oils are based on highly ageing resistant solvent raff inates and fulfill, and in many points surpass, the minimum requirements made on HM hydraulic oils according to ISO 6743-4.
The RENOLIN B series of oils offer the following advantages:
- Good EP properties and thus protection against wear
- Good viscosity-temperature behaviour
- Excellent oxidation stability and resistance to ageing
- Excellent corrosion protection
- Rapid air release and low foaming
- Good demulsification characteristics
- Good elastomer compatibility
Application:
The RENOLIN B series of oils are not just high grade hydraulic oils. They are also excellent CKC lubricating oils according to ISO 6743-6 which can be used for numerous applications such as gearboxes and bearings.
| RENOLIN |
|
B 3 |
B 5 |
B 10 |
B 15 |
B 20 |
B 30 |
|
| acc. to ISO 6743-4 |
|
HM 10 |
HM 22 |
HM 32 |
HM 46 |
HM 68 |
HM 100 |
|
| acc. to DIN 51 502 |
|
HLP 10 |
HLP 22 |
HLP 32 |
HLP 46 |
HLP 68 |
HLP 100 |
|
| Characteristics |
Unit |
|
|
|
|
|
|
Test method |
| Colour |
|
1 |
1 |
1 |
1.5 |
2 |
2.5 |
ASTM D 1500 |
| Kinematic viscosity |
|
|
|
|
|
|
|
|
| at 40 °C |
mm²/s |
10 |
22.4 |
32 |
47 |
67 |
100 |
ASTM D 445 |
| at 100 °C |
mm²/s |
2.5 |
4.4 |
5.6 |
7.1 |
8.6 |
11 |
ASTM D 445 |
| Viscosity index |
|
61 |
105 |
114 |
109 |
99 |
94 |
ASTM D 2270 |
| Density at 15 °C |
kg/l |
0.85 |
0.865 |
0.88 |
0.88 |
0.882 |
0.888 |
ASTM D 1298 |
| Flash point, Cleveland open cup |
°C |
160 |
163 |
188 |
210 |
224 |
232 |
ASTM D 92 |
| Pour point |
°C |
- 27 |
- 30 |
- 27 |
- 27 |
-24 |
- 21 |
ASTM D 97 |
| Neutralization number |
mg KOH/g |
0.3 |
0.3 |
0.3 |
0.3 |
0.3 |
0.3 |
ASTM D 974 |
| Saponification number |
mg KOH/g |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
0.6 |
ASTM D 94 |
| Oxide ash |
% mass |
0.2 |
0.2 |
0.2 |
0.2 |
0.2 |
0.2 |
ASTM D 482 |
| Water content |
% mass |
not traceable |
not traceable |
not traceable |
not traceable |
not traceable |
not traceable |
ASTM D 95 |
| Insolubles |
% mass |
not traceable |
not traceable |
not traceable |
not traceable |
not traceable |
not traceable |
DIN 51 592 |
| Demulsification |
min |
15 |
15 |
15 |
15 |
15 |
15 |
DIN 51 599 |
| Air release at 50 °C |
min |
1 |
3 |
6 |
7 |
8 |
16 |
ASTM D 3427 |
| Foaming, |
|
|
|
|
|
|
|
|
| seq. I |
ml |
35/0 |
5/0 |
20/0 |
10/0 |
20/0 |
10/0 |
ASTM D 892 seq. I-III |
| seq. II |
ml |
10/0 |
10/0 |
20/0 |
40/0 |
30/0 |
30/0 |
ASTM D 892 seq. I-III |
| seq. III |
ml |
35/0 |
5/0 |
20/0 |
10/0 |
20/0 |
10/0 |
ASTM D 892 seq. I-III |
| Copper corrosion |
degree of corr. |
1a-100A24 |
1a-100A24 |
1a-100A24 |
1a-100A24 |
1a-100A24 |
1a-100A24 |
ASTM D 130 |
| Rust prevention |
|
pass A |
pass A |
pass A |
pass A |
pass A |
pass A |
ASTM D 665 |
| FZG mechanical gear rig test |
load stage |
12 |
12 |
12 |
12 |
12 |
12 |
DIN 51 354-2 |
| Vickers vane pump test, loss of mass |
|
|
|
|
|
|
|
|
| on ring |
mg |
< 120 |
< 120 |
< 120 |
|
|
|
IP 281 |
| on vanes after 250 h |
mg |
< 30 |
< 30 |
< 30 |
|
|
|
IP 281 |
| Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours, relative volume change |
|
|
|
|
|
|
|
|
| change in Shore A |
% |
15 |
7 |
5 |
5 |
5 |
5 |
DIN 53 521 together with DIN 53 505 |
| hardness |
Shore |
- 2 |
- 1 |
- 1 |
- 1 |
- 1 |
- 1 |
DIN 53 521 together with DIN 53 505 |
|
| | |
|
|
|
版权所有：东莞市创亿嘉润滑油有限公司 粤ICP备19160599号
工业齿轮油生产厂家,想了解批发价格,用途,哪个牌子好,品牌哪家好请联系我们. |
 |
|
|
